← Back to all events

Smart City Expo USA 2025

APRIL 2-3, 2025 JAVITS CENTER NYC

NYC's Smart City Testbed: Catching Up with Paul Rothman and Briana Garcia from OTI

📖 Read Video Transcript
We have an application that companies can apply to.
It's a rolling admission.
And then we review those applications and look at matching the different technologies that come in with city agencies to run pilots.
So every pilot that we run has a subject matter expert within a given city agency.
And then we try to look for solutions that solve their needs.
And so so far we've run four pilots in 2024.
The results so far we've been really happy with we've received over 130 applications in that last year from companies from across the globe.
We did an air quality improvement pilot with the Department of Health and Mental Hygiene.
We kind of had a two for one technology pilot for this project, where we looked at an air quality sensor itself, a three and a half pound monitor with a solar panel on top with the objective of can we collect hyperlocal air quality data?
The second part of this pilot was looking at air quality improvement devices.
Can we find a technology to really take down the air quality pollutants in real time?
So the first part of this pilot was to deploy the smaller air quality sensors in and around a school in Queens to get baseline data.
Then we deployed a few weeks later these air quality improvement devices.
The devices use static electricity to pull particulate matter out of the air and to settle on a piece of metal.
So really we wanted to see can we get the before data, the hyperlocal air quality, and then deploy the air quality improvement devices and get the after data.
And so, the pilot went well, we're happy to say that the air quality sensors themselves read pretty well compared to the other sensors.
Just for quality and assurance check.
The air quality in New York City last summer was also quite good.
So we didn't really get a chance to put the air quality improvement devices really to the test.
We've just closed out a building energy efficient pilot with the Department of Citywide Administrative Services and their Department of Energy Management.
So really, the goal of this pilot was to use two different robotics to understand where we have energy leaks.
So one robot has ground penetrating radar that we put on top of roofs.
And it went back and forth to identify any membrane issues within the roof itself.
And then we also had a drone flying around buildings with thermal imaging.
Combining those data sets we were able to see where buildings needed to have micro retrofits done.
And also gives building operators an opportunity again, to fix that membrane issue in their roof.
And if they wanted to deploy solar later on, fix the issue, then deploy solar.
We look for kind of like mature products that can be procured at some stage.
And, you know, we look for companies that have a track record in other cities, let's say they've done pilots elsewhere.
That's not to say we won't do a pilot with a company that hasn't worked other places.
We've done that already, but that helps the application stand out.
And then just sort of a mature product that we can recognize as a potential solution for a city agency that we've worked with, that we know that this is a challenge that they're trying to tackle.
We just launched a pilot called the Clean Construction Innovation Pilot with the Mayor's Office of Climate and Environmental Justice.
The purpose here is to really see if we can swap out diesel powered construction equipment with electric under the policy, or EO 23, with the objective of using clean construction equipment where possible.
And so this pilot they're doing in conjunction with mock EJ is a way for us to really test out what electric construction equipment can do for us.
And so we we just closed our RFP a few weeks ago.
We have several applications resulting in many pieces of equipment from light to medium duty piece of equipment, but also charging solutions.
So now we're in the process of matching the right equipment with the right agency and job site.
The goal really is to test the equipment.
How well does it run?
What type of workload drains the battery faster?
What's the best way to recharge it?
What are the operational users experience with this type of technology?
So once we finish the pilot, the equipment gets returned to the vendor.
And then it's really up to those agencies to figure out what their next step is.
So it may not be an immediate, okay, we're going to procure something.
It's not a procurement vehicle per se.
It's really an educational program for the agencies.
We did have one of our one of our pilots remain installed.
A computer vision sensor remain installed.
And so we were running that, with the Department of Transportation really focusing on quantified counts for vulnerable road users like, pedestrians and cyclists.
So by using the technology, we're able to automate that, get 24/7 data, through that technology and then that data can then be used by the Department of Transportation to make decisions about how we're designing our streets, how we're allocating space and resources for the different modes shares that we're seeing through that data.
So that was 12 sensors that we piloted.
And then at the end of that pilot, DoT felt like they got enough out of it that they wanted to continue to use those sensors in those locations to continue collecting data.
And looking at the opportunities to fund a larger rollout of that type of technology throughout the city.

Latest Kurrantly News

All news

Latest Kurrant Originals

See all

Kurrant advisory

Planning a smart city or utility project? Talk to Kurrant.

Behind these interviews is Kurrant's advisory team, working with utilities, cities and the companies that serve them.

  • Strategy AdvisoryKurrant is actively involved in resolving the challenges that cities, utilities and industry players are facing.
  • M&A AdvisorySmart city and utility expertise for successful deals, turning insights into strategic gains.
  • Engineering & ProcurementBetter engineering and procurement decisions, by identifying and developing digital and IoT solutions across use cases.

Or write to us: contact@kurrant.com

Send us a message